Product details
This Acti9 electrical auxiliary contact is a modular OC contact used as a remote indicator of the position of the associated device. On AC mains, the nominal current In is between 100mA and 6A at 240VAC, 50Hz-60Hz, and 100mA and 3A at 415VAC, 50Hz-60Hz. On DC mains, the nominal current In always starts from 100mA at 24VDC and continues up to 130VDC. It goes up to 6A at 24VDC, 2A at 48VDC, 1.5A at 60VDC and 1A at 130VDC. It has a 1-position switch with 1 C/O contact type. It is designed for new or refurbished installations in small commercial premises or buildings. This OC contact is compatible with Acti9 series such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA, iC60 RCBO. This OC contact is compatible with Acti9 series such as Acti9 iDT40, iDT40 XA and iDD40. iOF is used for the short name or compatibility code of the device. There is a screw clamp terminal connection on the bottom. The connection allows rigid copper cable. The cable cross-section capacity is from 1mm² to 4mm². There is a screw clamp terminal connection on the bottom. The connection allows flexible copper cable. The cable cross-section capacity is from 0.5mm² to 2.5mm². There is a screw clamp terminal connection on the bottom. The connection allows rigid copper cables (2 wires). The cable cross-section capacity is 2.5 mm². Bottom screw clamp terminal connection. The connection allows flexible connection with copper cables with ferrules (2 wires). The cable cross-section capacity is 1.5 mm². Rated insulation voltage (Ui) is up to 500V. Rated impulse withstand voltage (Uimp) is 4kV. Width is 1 in at 9 mm intervals. Dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. Product colour is white (RAL 9003). Pollution degree is 3. Tropicalization level is purification 2. The connection tightening torque for screwdriver type PZ1 is 1N.m (bottom). IP degree of protection according to IEC 60529 is IP20. Operating temperature is -35 °C to +70 °C. Storage temperature is between -40°C and +85°C. This product complies with EN/IEC 60947-5-1 and GB/T 14048.5 standards. This product is certified with CE and UKCA marks.